RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
HINT: Tape the screwdriver tip before use.
(b) Remove the 2 screws and assist grip sub-assembly.
HINT: Use the same procedure for the other 3 assist grips.
51. REMOVE RAIN SENSOR (W/Rain Sensor)
52. REMOVE ROOM LIGHT ASSEMBLY NO.1
(a) Using a screwdriver disengage the 4 claws and remove the lens cover.
HINT: Tape the screwdriver tip before use.
(b) Using a screwdriver disengage the 2 springs as shown in the illustration.
HINT: Tape the screwdriver tip before use.
(c) Disengage the 2 claws and remove the room light assembly No.1.
(d) Disconnect the connector.
53. REMOVE MAP LIGHT ASSEMBLY