RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
_hybrid/Page-1020006.png)
18. REMOVE BRAKE MASTER CYLINDER W/SIMULATOR ASSEMBLY
a. Using SST, disconnect the 2 brake tubes.
SST 09023-00101
b. Disconnect the connector, and separate the wire harness clamp.
c. Remove the 4 nuts, the gasket and the brake master cylinder with simulator.
INSTALLATION
1. INSTALL BRAKE MASTER CYLINDER W/SIMULATOR ASSEMBLY
a. Install the gasket and brake master cylinder assembly together with the brake simulator assembly with the 4 nuts.
Torque: 12.7 Nm (130 kgf-cm, 9 ft. lbs.)
