RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
g. Remove the 3 nuts and brake actuator assembly with brake actuator bracket assembly.
NOTE: Do not damage the brake tubes.
INSTALLATION
1. INSTALL BRAKE ACTUATOR ASSEMBLY
a. Install the brake actuator assembly with bracket to the body with the 3 nuts.
Torque: 19 N.m (194 kgf.cm, 14 ft.lbf)
NOTE: Do not damage the brake tubes.
b. Connect the brake actuator connector.
NOTE: Make sure that the connector is locked securely.
c. Install the brake tube bracket with the bolt.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)