RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
a. Remove the 2 nuts and brake actuator assembly from the actuator bracket.
b. Remove the 2 brake actuator bolt holders.
REASSEMBLY
1. INSTALL BRAKE ACTUATOR ASSEMBLY
a. Install the 2 brake actuator bolt holders.
b. Install the brake actuator assembly to the actuator bracket with the 2 nuts.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
NOTE: Do not remove the hole plug before connecting the brake tube because a new brake actuator assembly is filled with brake fluid.