RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
_hybrid/Page-1031001.png)
Electronic Brake Control Module: Diagrams
TERMINALS OF ECU
1. CHECK BATTERY VOLTAGE
a. Measure the battery voltage.
Voltage: 10 to 14 V
2. SKID CONTROL ECU ASSEMBLY INSPECTION
a. Measure the voltage between each terminal or between each terminal and the body ground.
b. Connect the intelligent tester to the DLC3, and check the communication condition with the skid control ECU.
c. Using an oscilloscope, check that the pulse generates between each terminal or between each terminal and the body ground.
Terminals Of Control Module/Pinouts (Part 1)