RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
_hybrid/Page-1035001.png)
Acceleration/Deceleration Sensor: Testing and Inspection
INSPECTION
1. INSPECT YAW RATE SENSOR ASSEMBLY
a. Inspect the yaw rate sensor assembly. If any of the following occurs, replace with a new yaw rate sensor assembly:
-
The surface of the yaw rate sensor assembly is cracked, dented, or chipped off.
-
The connector is scratched, cracked, or damaged.
-
The yaw rate sensor assembly has been dropped.
