RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
New Shim Thickness MM (Inch)
HINT: New shims have the thickness in millimeters imprinted on the face.
h. Place a new adjusting shim on the valve lifter with imprinted number facing down.
i.
Press down the valve lifter with SST (A), and remove SST (B).
SST 09248-55040 (09248-05410, 09248-05420)
j.
Recheck the valve clearance.
25. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY
a. Apply seal packing to the cylinder head as shown in the illustration.
Seal packing: Part No. 08826-00080 or equivalent
NOTICE:
^
Remove any oil from the contact surface.
^
Install the cylinder head cover within 3 minutes after applying seal packing.
^
Do not start the engine within 2 hours after installing.
b. Install the cylinder head cover with the 9 bolts. Tighten the bolts uniformly in several steps.
Torque: 8.0 Nm (80 kgf-cm, 71 inch lbs.)