lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

A/C - Excessive Dust/Powder Blows From A/C Vents|Page 6705 > < A/C - Excessive Dust/Powder Blows From A/C Vents
Page 2
background image

This TSIB applies to RX 350 and RX 400h vehicles produced BEFORE the Production Change Effective VINs shown and to ALL 2007 - 2008 model
year ES 350 vehicles.

Parts Information

Required Tools & Equipment

NOTE

Additional refrigerant service equipment may be ordered by calling Lexus Approved Dealer Equipment (ADE).

Repair Procedure

1. Confirm the condition.

Check for excessive white dust or powder on the top of the instrument panel and interior surfaces.

^

If white dust or debris IS present check the cabin air filter for damage and for other external sources of debris. Proceed to step 2 for replacement
of the evaporator if all checks are OK.

^

If white dust or debris is NOT present there is no need to replace the evaporator.

2. Remove the evaporator.

Refer to the Technical Information System (TIS) applicable model and model year Repair Manual:

^

2007 ES 350:
Vehicle Interior - Heating/Air Conditioning - "Air Conditioning: Air Conditioning Unit: Removal and Disassembly"

^

2008 ES 350:
Vehicle Interior - Heating/Air Conditioning - "Air Conditioning: Air Conditioning Unit: Removal and Disassembly"

^

2007 RX 350:

A/C - Excessive Dust/Powder Blows From A/C Vents|Page 6705 > < A/C - Excessive Dust/Powder Blows From A/C Vents