RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
_hybrid/Page-557004.png)
1. Remove the battery room ventilation hose between the HV batteries LH and CTR.
2. Disconnect the wire harness clamp of the battery thermo sensor.
3. Remove the nut and main battery cable from the HV battery.
NOTE:
-
Insulate the tool with insulating tape.
-
Do not use the universal joint.
4. Remove the nut, then disconnect the EV battery plug from the HV battery.
NOTE:
-
Insulate the tool with insulating tape.
-
Do not use the universal joint.
