RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
6. REMOVE POWER STEERING ECU ASSEMBLY
7. SEPARATE INVERTER RESERVE TANK SUB-ASSEMBLY
a. Remove the 2 bolts and inverter reserve tank sub-assembly.
8. REMOVE POWER STEERING ECU BRACKET
9. REMOVE INVERTER COVER
10. VERIFY THAT VOLTAGE OF W/CONVERTER INVERTER ASSEMBLY IS 0V
11. INSTALL INVERTER COVER
12. DRAIN HYBRID TRANSAXLE FLUID
13. REMOVE REAR WHEELS
14. REMOVE EXHAUST PIPE ASSEMBLY
15. REMOVE REAR AXLE SHAFT LH NUT
16. REMOVE REAR AXLE SHAFT RH NUT
HINT: Removal procedure of the RH side is the same as that of the LH side.
17. DISCONNECT HEIGHT CONTROL SENSOR (W/Discharge Headlight)
18. SEPARATE REAR STRUT ROD ASSEMBLY
a. Support the rear axle carrier with a wooden block placed between the jack and axle carrier.
b. Remove the bolt, nut and strut rod assembly rear.
NOTICE: Hold the nut to turn the bolt.