RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
a. Disconnect the connector.
b. Remove the nut and headlight swivel ECU.
INSTALLATION
1. INSTALL HEADLIGHT SWIVEL ECU
a. Install the headlight swivel ECU with the nut.
Torque: 7.0 N.m (71 kgf.cm, 62 in.lbf)
b. Connect the connector.
2. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER
3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
4. INSTALL FRONT DOOR SCUFF PLATE LH
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM INITIALIZATION