RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
a. Disengage the 2 claws, and remove the power outlet socket cover rear.
INSTALLATION
1. INSTALL POWER OUTLET SOCKET COVER REAR
a. Engage the 2 claws and install the power outlet socket cover rear.
2. INSTALL REAR POWER POINT SOCKET
a. Place the rear power point socket with the notch on the power point socket cover, and push in the rear power point socket as hard as possible to
install it.
3. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH
4. INSTALL NO.1 TONNEAU COVER HOLDER CAP
5. INSTALL NO.2 ROOM LIGHT ASSEMBLY