RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
_hybrid/Page-785003.png)
c. Connect the air fuel ratio sensor connector and clamp.
2. INSTALL AIR FUEL RATIO SENSOR (for Bank 2)
a. Temporarily tighten the air fuel ratio sensor to the exhaust manifold converter sub-assembly No.2.
NOTE: Do not damage the air fuel ratio sensor.
b. Using SST, fully tighten the air fuel ratio sensor to the exhaust manifold converter sub-assembly No.2.
SST 09224-00010
Torque: 44 N.m (449 kgf.cm, 32 ft.lbf)
c. Connect the air fuel ratio sensor connector and clamp.
