RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
b. Using SST, fully tighten the oxygen sensor to the exhaust pipe sub-assembly front No.3.
SST 09224-00010
Torque: 44 N.m (449 kgf.cm, 32 ft.lbf)
c. Connect the oxygen sensor connector and clamp.
2. INSTALL OXYGEN SENSOR (for Bank 2)
a. Temporarily tighten the oxygen sensor to the exhaust pipe sub-assembly front.
NOTE: Do not damage the oxygen sensor.
b. Using SST, fully tighten the oxygen sensor to the exhaust pipe sub-assembly front.
SST 09224-00010
Torque: 44 N.m (449 kgf.cm, 32 ft.lbf)