RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
_hybrid/Page-880008.png)
a. Remove the EFI fuel pipe clamp No.1.
b. Pinch the quick connector and then pull out the fuel pipe No.1.
NOTE:
-
Remove dirt or foreign objects on the quick connector before this work.
-
Do not to allow any scratches or foreign objects on the parts when disconnecting as the fuel hose connector has the O-ring that seals the
pipe.
-
Perform this work by hand. Do not use any tools.
-
Do not forcibly bend, twist or turn the nylon tube.
-
Protect the connected part by covering it with a vinyl bag after disconnecting the hose.
-
If the quick connector and pipe are stuck, push and pull them to release.
22. DISCONNECT HEATER WATER INLET HOSE
a. Disconnect the heater water inlet hose.
23. DISCONNECT RADIATOR HOSE INLET
