RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
a. Install the intake manifold with the 9 bolts, 2 nuts and 2 washers. Using several steps, tighten the bolts and nuts uniformly in the sequence
shown in the illustration.
Torque: 15 N.m (153 kgf.cm, 11 ft.lbf)
b. Retighten the water outlet mounting bolts and nuts.
Torque: 15 N.m (153 kgf.cm, 11 ft.lbf)
c. Connect the 6 fuel injector connectors.
d. Install the ground cable with the nut.
Torque: 8.4 N.m (86 kgf.cm, 74 in.lbf)
4. CONNECT RADIATOR HOSE INLET
a. Connect the radiator hose inlet.
5. CONNECT HEATER WATER INLET HOSE