RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
_hybrid/Page-10003.png)
Parts Information
Required Tools & Equipment
Repair Procedure: Mirror ECU Replacement
1. Disconnect the negative (-) battery terminal.
CAUTION
Wait at least 90 seconds after the ignition switch is turned to the "LOCK" position and the negative (-) terminal cable is disconnected from the
battery before starting the operation.
2. Remove the front door inside handle bezel plug.
Using a plastic pry tool disengage the 3 claws and remove the front door inside handle bezel plug.
