RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
F. For heated mirrors:
Disconnect both 1-pin heater connectors from the mirror assembly.
G. Take oft the ECM connector from the mirror assembly and pull off the white connector.
3. Remove the mirror actuator.
A. Remove the 3 screws from the actuator.
B. Gently disconnect the 3 connectors from the mirror actuator.
Disconnect the hidden 5-pin connector by pushing down on the lock tab.
C. Remove the OLD actuator and discard.
4. Assemble a NEW actuator and mirror.
NOTE
^
Reassembly is the reverse order of disassembly.
^
You MUST fit in the harness connector correctly.