RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
3. REMOVE FRONT BUMPER ASSEMBLY
4. REMOVE FRONT BUMPER ENERGY ABSORBER
5. REMOVE FRONT BUMPER REINFORCEMENT
6. REMOVE LASER SENSOR
a. Disconnect the connector and remove the laser sensor.
INSTALLATION
1. INSTALL LASER SENSOR
a. Connect the connector.
b. Hang the laser sensor onto the RH side member.
NOTE: Do not install the laser sensor if it has been damaged or impacted in any way.
2. INSTALL FRONT BUMPER REINFORCEMENT
3. INSTALL FRONT BUMPER ENERGY ABSORBER
4. INSTALL FRONT BUMPER ASSEMBLY
5. INSTALL FRONT BUMPER STAY CENTER
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. ADJUST LASER SENSOR
8. PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal.