RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
_hybrid/Page-192002.png)
6. REMOVE DECK BOARD SUB-ASSEMBLY NO.2
7. REMOVE DECK BOARD SUB-ASSEMBLY NO.3
8. REMOVE DECK SIDE TRIM BOX RH
9. REMOVE DECK SIDE TRIM BOX LH
10. REMOVE REAR CIRCUIT BREAKER SENSOR
a. Remove the rear circuit breaker sensor (LH).
1. Move the outer section to the wire harness side as illustrated, then disconnect the rear circuit breaker sensor (LH).
2. Remove the 2 bolts and rear circuit breaker sensor (LH).
b. Remove the rear circuit breaker sensor (RH).
1. Move the outer section to the wire harness side as illustrated, then disconnect the rear circuit breaker sensor (RH).
2. Remove the 2 bolts and rear circuit breaker sensor (RH).
