RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
c. Using SST, compress the front coil spring.
SST 09727-30021 (09727-00010, 09727-00021, 09727-00031)
NOTICE: Do not use an impact wrench.
HINT: If the front coil spring is compressed at an angle, using 2 SSTs will make the work easier.
d. Install the front coil spring to the front shock absorber.
NOTICE: The smaller diameter end of the front coil spring must face upward.
HINT: Fit the lower end of the front coil spring into the gap if the insulator.
e. Install the front coil spring insulator upper as shown in the illustration.
HINT: Any misalignment between the front shock absorber lower bracket and the A mark must be ±5°.