RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
d. Install the 2 nuts to the lower side of the front shock absorber with coil spring.
Torque: 290 Nm (2,960 kgf-cm, 214 ft. lbs.)
NOTICE: When installing the nuts, keep the bolts from rotating.
e. Install the front flexible hose No.2 and front speed sensor wire harness with the bolt.
Torque: 19 Nm (194 kgf-cm, 14 ft. lbs.)
NOTICE: Do not twist the front speed sensor wire harness then installing.
f.
Fully tighten the lock nut.
Torque: 49 Nm (500 kgf-cm, 36 ft. lbs.)
2. INSTALL COWL TOP SILENCER PAD
a. Engage the 5 claws to install the cowl top silencer pad.
3. INSTALL FRONT STABILIZER LINK ASSEMBLY
a. Install the front stabilizer link assembly with the nut.
Torque: 74 Nm (755 kgf-cm, 55 ft. lbs.)
HINT: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.
4. INSTALL FRONT WHEEL