RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
19. INSTALL DECK BOARD SUB-ASSEMBLY
20. CHECK ABS SPEED SENSOR SIGNAL
21. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
22. INSPECT AND ADJUST REAR WHEEL ALIGNMENT
DISPOSAL
1. DISPOSE OF REAR SHOCK ABSORBER
a. Fully extend the shock absorber piston rod.
b. Using a drill, make a hole in area B shown in the illustration to discharge the gas inside.
CAUTION:
^
Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.
^
The gas is colorless, odorless and non-poisonous.