RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
1. INSTALL TIRE PRESSURE WARNING RESET SWITCH
(a)
Engage the 2 claws to install the tire pressure warning reset switch to the lower instrument panel finish panel sub-assembly.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
3. INSTALL FRONT DOOR SCUFF PLATE LH
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. INSPECT TIRE PRESSURE WARNING SYSTEM
6. PERFORM INITIALIZATION
HINT:
Some systems need initialization after reconnecting the cable to the negative battery terminal.