RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
9. REMOVE FRONT WHEEL BEARING DUST DEFLECTOR NO.1
(a)
Using a screwdriver with its tip wrapped with vinyl tape, remove the bearing dust deflector No. 1.
NOTICE:
Be careful not to damage the steering knuckle.
10. REMOVE FRONT AXLE HUB HOLE SNAP RING
(a)
Using snap ring pliers, remove the front axle hub hole snap ring.
11. REMOVE FRONT AXLE HUB SUB-ASSEMBLY
(a)
Hold the front axle assembly between aluminium plates in a vise.
NOTICE:
Do not overtighten the vise.
(b) Using SST, remove the front axle hub sub-assembly.
SST 09520-00031