RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
Remote Switch: Service and Repair
STEERING PAD SWITCH
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
2. REMOVE NO.2 STEERING WHEEL COVER LOWER
3. REMOVE NO.3 STEERING WHEEL COVER LOWER
4. REMOVE STEERING PAD
5. REMOVE STEERING PAD SWITCH LH
a. Disconnect the connector.
b. Remove the screw.
c. Disengage the 2 claws and the pin.
d. Remove the steering pad switch LH.
6. REMOVE STEERING PAD SWITCH RH
a. Disconnect the connector.
b. Remove the screw.
c. Disengage the 2 claws and the pin.
d. Remove the steering pad switch RH.
INSTALLATION
1. INSTALL STEERING PAD SWITCH LH