RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
Speaker: Service and Repair
Front No. 2 Speaker
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
3. REMOVE CONSOLE PANEL UPPER FRONT
4. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER
5. REMOVE RADIO RECEIVER
6. REMOVE MULTI-DISPLAY
7. REMOVE NO.1 SPEAKER HOLE COVER
a. Disengage the 4 clips.
b. Remove the No.1 speaker hole cover by pushing it up from the under side of the instrument panel.
8. REMOVE FRONT NO.2 SPEAKER
a. Remove the 2 bolts.
b. Disconnect the connector and front No.2 speaker.
INSTALLATION
1. INSTALL FRONT NO.2 SPEAKER
a. Connect the connector.