RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
Trailer Hitch: Technical Service Bulletins
Body/Frame - Towing Receiver Hitch Installation
ACCESSORIES
AX003-05
REVISED
June 13, 2005
Title:
TOWING RECEIVER HITCH INSTALLATION INSTRUCTIONS REVISION
Models:
'06 RX 400h
TSIB REVISION NOTICE:
September 1, 2005: The Installation Procedure section has been revised. The previous TSIB should be discarded.
Introduction
The 2006 model year RX 400h hybrid vehicle uses the same part number Towing Receiver Hitch as the RX 330, but the installation process is different.
There are two plastic covers, which are unique to the RX 400h, that must be removed and discarded during the Towing Receiver Hitch installation.
Installation instructions included with the Towing Receiver Hitch kits produced prior to April 1, 2005 will not include the requirement to remove the two
plastic covers. Please refer to the installation instructions that can be found on the Technical Information System (TIS) to complete the installation of the
Towing Receiver Hitch for the 2006 RX 400h.
Applicable Vehicles
^
2006 model year RX 400h vehicles.
Parts Information
Installation Procedure
Follow the installation instructions provided on TIS.
Warranty Information