RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
^
Fundamental Painting Procedures manual (Pub. No. 00400-BRM33-U).
NOTE
Publication documents may be ordered from the Material Distribution Center (MDC) through the Dealer Daily - Dealer Support Material Orders.
4. Disconnect cable from negative battery terminal before welding.
CAUTION
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
A. Record radio presets.
B. Add a spot weld to the location as illustrated below to left and right strut area (Left side shown for reference).
5. Apply seam sealer to the weld location and repaint the rear hatch area according to the paint manufacturer's recommendations.
6. Confirm leak is eliminated by water testing.