RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
(a) Remove the 2 bolts 2 nuts and deck No.3 board sub-assembly.
7. REMOVE DECK NO.2 BOARD SUB-ASSEMBLY
(a) Remove the 4 blots 2 nuts and deck No.2 board sub-assembly.
8. REMOVE BACK DOOR WEATHERSTRIP
9. REMOVE REAR FLOOR FINISH PLATE
(a) Using a clip remover remove the 2 clips.
(b) Disengage the 2 claws and 6 clips and remove the rear floor finish plate.
10. REMOVE JACK CARRIER ASSEMBLY
(a) Remove the jack carrier support jack assembly and jack carrier assembly.
11. REMOVE DECK SIDE TRIM LH BOX
(a) Remove the clip (A).
(b) Using a clip remover remove the clip (B) and deck side trim box.