RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
(a) Using a screwdriver remove the tonneau cover holder cap.
HINT: Tape the screwdriver tip before use.
(b) Remove the 3 bolts.
(c) Using a clip remover remove the 3 clips.
(d) Disengage the 7 clips and remove the roof side garnish assembly inner.
(e) Disengage the 4 claws and separate the seat belt bezel.
47. REMOVE ROOF SIDE RH GARNISH ASSEMBLY INNER
48. REMOVE TELEVISION BASE (W/Rear Seat Entertainment System)
49. REMOVE TELEVISION DISPLAY ASSEMBLY (W/Rear Seat Entertainment System)
50. REMOVE ASSIST GRIP SUB-ASSEMBLY
(a) Using a screwdriver disengage the 3 claws and remove the 2 assist grip covers.