RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
1. INSTALL BRAKE ACTUATOR ASSEMBLY
a. Install the brake actuator assembly with bracket to the body with the 3 nuts.
Torque: 19 Nm (194 kgf-cm, 14 ft. lbs.)
NOTICE: Do not damage the brake tubes.
b. Connect the brake actuator connector.
NOTICE: Make sure that the connector is locked securely.
c. Install the brake tube bracket with the bolt.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
d. Connect the front brake No. 8 tube to the front flexible hose.
SST 09023-00101
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)