RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
5. Connect the battery room ventilation hose between the HV batteries LH and CTR.
NOTE: Align the projections of the battery room ventilation hose and the rubber tube, and install the hose.
9. INSTALL BATTERY SMART UNIT
10. CHECK HIGH VOLTAGE CABLE CONNECTION
CAUTION: Wear insulating gloves and protective glasses.
a. Check that each wire harness is being installed securely.
NOTE:
-
The connectors should be connected securely.
-
The nuts should be fastened securely.
-
Make sure that the 4 plastic covers are engaged securely.
11. INSTALL BATTERY COVER SUB-ASSEMBLY
CAUTION: Wear insulating gloves.