RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-626002.png)
2. Remove the 2 bolts and rear circuit breaker sensor (RH).
INSTALLATION
1. INSTALL REAR CIRCUIT BREAKER SENSOR
a. Install the rear circuit breaker sensor (RH).
1. Install the circuit breaker sensor (RH) with the 2 bolts.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
2. Connect the connector to the rear circuit breaker sensor (RH).
b. Install the rear circuit breaker sensor (LH).
1. Install the rear circuit breaker sensor (LH) with the 2 bolts.
