RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-1839001.png)
License Plate Lamp: Service and Repair
Removal and Installation
LICENSE PLATE LIGHT ASSEMBLY
REMOVAL
1. REMOVE BACK DOOR TRIM PANEL ASSEMBLY UPPER
2. REMOVE BACK DOOR TRIM PANEL ASSEMBLY
3. REMOVE BACK DOOR GARNISH
4. REMOVE LICENSE PLATE LIGHT ASSEMBLY
a. Disengage the 2 claws and separate the license plate light assembly.
b. Disconnect the connector and remove the license plate light assembly.
INSTALLATION
1. INSTALL LICENSE PLATE LIGHT ASSEMBLY
a. Install the license plate light assembly with the 2 claws.
b. Connect the connector.
2. INSTALL BACK DOOR GARNISH
3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY
4. INSTALL BACK DOOR TRIM PANEL ASSEMBLY UPPER
