RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
a. Place the bearing inner race (outside) on the front axle hub bearing.
b. Using SST and a press, press the front axle hub bearing until it contacts the SST.
SST 09527-17011, 09950-60010 (09951-00600, 09951-00400, 09952-06010), 09950-70010 (09951-07100)
c. Using SST to make the steering knuckle horizontal, fix it to the V-block, as shown in the illustration.
d. Using SST and a press, remove a front axle hub bearing to the steering knuckle.
SST 09950-60010 (09951-00600, 09951-00400, 09952-06010), 09950-70010 (0995107100), 09527-20011
INSTALLATION
1. INSTALL FRONT AXLE HUB BEARING
a. Using SST and a press, install a new front axle hub bearing to the steering knuckle.
SST 09950-60020 (09951-00810), 09950-70010 (09951-07100)
2. INSTALL FRONT LOWER BALL JOINT ASSEMBLY
3. INSTALL FRONT DISC BRAKE DUST COVER