RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
Throttle Body: Service and Repair
REMOVAL
1. PRECAUTION
2. REMOVE ENGINE ROOM SIDE LH COVER
3. REMOVE ENGINE ROOM COVER SIDE
4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
5. DRAIN COOLANT
6. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
7. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
8. REMOVE COWL TOP VENTILATOR LOUVER SUBASSEMBLY
9. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
10. REMOVE COWL TOP PANEL SUB-ASSEMBLY OUTER
11. REMOVE COOL AIR INTAKE DUCT SEAL
12. REMOVE AIR CLEANER CAP W/ INLET
a. Disconnect the 4 clamps.
b. Remove the 2 bolts and air cleaner cap w/ inlet.
c. Remove the air cleaner element from the air cleaner case.
13. REMOVE AIR CLEANER CASE W/ RESONATOR
a. Separate the ventilation hose No.2.
b. Disconnect the MAF meter connector.
c. Disconnect the 2 wire harness clamps from the air cleaner.