RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-701002.png)
b. Install the crankshaft position sensor with the bolt.
Torque: 8.0 N.m (80 kgf.cm, 71 in.lbf)
c. Connect the crankshaft position sensor connector.
2. INSTALL FRONT FENDER APRON SEAL RH
a. Install the front fender apron seal RH with the clip and 2 bolts.
3. INSTALL FRONT FENDER SPLASH SHIELD SUBASSEMBLY RH
a. Install the front fender splash shield sub-assembly RH with the screw.
4. INSTALL ENGINE UNDER COVER NO.1
