RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
1. INSTALL SKID CONTROL BUZZER ASSEMBLY
a. Engage the clamp to install the skid control buzzer assembly.
2. INSTALL DISTANCE CONTROL ECU ASSEMBLY WITH SKID CONTROL BUZZER ASSEMBLY
a. Install the distance control ECU assembly with skid control buzzer assembly with the bolt.
NOTE: Do not install the distance control ECU assembly if it has been damaged or impacted in any way.
b. Connect the 2 connectors.
3. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY
4. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER
5. INSTALL FRONT DOOR SCUFF LH PLATE
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal.