RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
2. Wind the wire harness around each of the stud bolts of the front seat side airbag assembly as shown in the illustration.
3. Position the front seat side airbag assembly inside the tire as shown in the illustration.
Tire size: Must exceed the following dimensions
Width: 185 mm (7.28 in.)
Inner diameter: 360 mm (14.17 in.)
CAUTION:
- Make sure that the wire harness is tight. If there is slack in the wire harness, the front seat side airbag assembly may become loose due to
the shock when the airbag is deployed.
- Always tie down the front seat side airbag assembly with the airbag deployment direction facing inside the tire.
NOTE: The tire will be damaged by the airbag deployment, so use an extra tire.
d. Install the SST.
1. Connect the SST connector to the front seat side airbag assembly connector.
SST 09082-00750