RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-1374035.png)
3. Tie the tires together with 2 wire harnesses.
CAUTION: Make sure that the wire harness is tight. Looseness in the wire harness results in the tires coming free due to the shock when
the airbag is deployed.
g. Deploy the airbag.
1. Connect the red clip of the SST to the battery positive (+) terminal and the black clip of the SST to the negative (-) terminal.
2. Check that no one is within a 10 m (33 ft) radius of the disc wheel which the steering pad is tied to.
3. Press the SST activation switch and deploy the airbag.
CAUTION: When deploying the airbag, make sure that no one is near the tire.
HINT: The airbag is deployed as the LED of the SST activation switch comes on.
h. Dispose of the steering pad.
CAUTION:
-
The steering pad becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
-
Use gloves and safety glasses when handling a steering pad with a deployed airbag.
-
Do not apply water, etc. to a steering pad with a deployed airbag.
-
Always wash your hands with water after completing the operation.
1. Remove the steering pad from the disc wheel.
