RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
NOTE:
^
Installation is in the reverse order of removal. However, special points concerning installation are indicated.
^
Use the same procedures for the RH side and LH side.
^
Be careful NOT to damage the body.
1.
Remove the seat track bracket cover inner front LH.
A.
Using a plastic pry tool disengage the 3 claws.
B.
Remove the seat track bracket cover inner front LH by pulling it out.
2.
Remove the seat track bracket cover outer front LH.
Using a plastic pry tool disengage the 2 claws and remove the seat track bracket cover outer front LH.
3.
Remove the seat track cover RH.
Using a plastic pry tool disengage the 4 claws and remove the seat track cover RH.
4.
Remove the seat track cover LH.
Use the same procedures described for the RH side.
5.
Remove the front seat assembly.
A.
Disconnect the connectors under the front seat assembly.
B.
Remove the 4 bolts and the front seat assembly.
NOTE:
Place protective cover over door sill. Be careful NOT to damage the body.