RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
Seat Belt: Service and Repair
Rear Center Seat Inner Belt
REMOVAL
1. REMOVE REAR SEAT TRACK BRACKET COVER
2. REMOVE REAR SEAT ASSEMBLY LH
3. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY
a. Remove the bolt and rear center seat inner belt assembly.
INSTALLATION
1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY
a. Install the rear center seat inner belt assembly with the bolt.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)
NOTE:
-
Tighten the bolt while the claws of the rear center seat inner belt assembly are in contact with the vehicle body.
-
Claw 1 shown in the illustration can have a clearance of up to 2.0 mm (0.08 in.) between the claw and the vehicle body.
HINT: Place the buckle of the rear center seat inner belt assembly somewhere on the floor carpet so that the buckle does not interfere with
installation of the seat.
2. INSTALL REAR SEAT ASSEMBLY LH
3. INSTALL REAR SEAT TRACK BRACKET COVER
4. INSPECT SLIDE ADJUSTER LOCK