RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-218001.png)
Headlamp Alignment Sensor: Service and Repair
HEIGHT CONTROL SENSOR
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE HEIGHT CONTROL SENSOR
a. Disconnect the connector.
b. Remove the nut and separate the height control sensor link.
c. 2WD:
1. Remove the 2 bolts and the height control sensor.
d. 4WD:
1. Remove the 2 bolts and the height control sensor.
INSTALLATION
1. INSTALL HEIGHT CONTROL SENSOR