RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
d. Install the occupant classification ECU.
NOTE:
-
If the occupant classification ECU has been dropped, or there are any cracks, dents or other defects in the case or connector, replace it with
a new one.
-
When installing the occupant classification ECU, be careful that the SRS wiring does not interfere with other parts and that it is not
pinched between other parts.
2. INSTALL FRONT SEAT ASSEMBLY
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION
a. Perform initialization
HINT: Some systems need initialization when disconnecting the cable from the negative battery terminal.
5. INSPECT CHECK POWER SEAT FUNCTION
6. INSPECT SEAT HEATER OPERATION
7. INSPECT SRS WARNING LIGHT
a. Inspect the SRS warning light