RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
Alignment: Service and Repair
Front Suspension
FRONT WHEEL ALIGNMENT
ADJUSTMENT
1. INSPECT TIRES
2. MEASURE VEHICLE HEIGHT
a. Bounce the vehicle at the corners up and down to stabilize the suspension and inspect vehicle height.
Vehicle Height
Measuring points:
A: Ground clearance of front wheel center
B: Ground clearance of lower suspension arm
No.2 bush set bolt center
C: Ground clearance of rear wheel center
D: Ground clearance of strut rod set bolt center
NOTICE: Before inspecting the wheel alignment, adjust the vehicle height to the specified range.
HINT: Bounce the vehicle at the corners up and down to stabilize the suspension and inspect vehicle height.
3. INSPECT TOE-IN
a. Bounce the vehicle at the corners up and down to stabilize the suspension and inspect toe-in.