RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
i.
Remove the SST slowly in order to release the coil spring.
NOTICE: Do not use an impact wrench.
HINT: Any misalignment between the front shock absorber lower bracket and the arrows must be ±5°.
INSTALLATION
1. INSTALL FRONT SHOCK ABSORBER WITH COIL SPRING
a. Install the front shock absorber with coil spring to the front axle assembly and insert the 2 bolts from the front side of the vehicle.
b. Slowly jack up the vehicle using a wooden block and install the front shock absorber with coil spring (upper side) to the vehicle.
c. Install the 3 nuts to the upper side of the front shock absorber with coil spring.
Torque: 80 Nm (816 kgf-cm, 59 ft. lbs.)