RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-1269005.png)
a. Remove the nut, and separate the parking brake cable No.3.
8. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY
a. Remove the 4 bolts and the rear axle hub and bearing assembly.
9. REMOVE SKID CONTROL SENSOR (for 2WD)
10. REMOVE REAR STRUT ROD ASSEMBLY
a. Support the rear axle carrier with a wooden block placed between the jack and axle carrier.
b. Remove the 2 bolts, 2 nuts and strut rod assembly rear.
11. SEPARATE REAR SUSPENSION ARM ASSEMBLY NO.1
a. Remove the bolt and nut, and separate the rear suspension arm assembly No.1.
12. SEPARATE REAR SUSPENSION ARM ASSEMBLY NO.2
a. Remove the bolt and nut, and separate the rear suspension arm assembly No.2.
