RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-1283009.png)
13. FULLY TIGHTEN REAR SUSPENSION ARM ASSEMBLY NO.2
a. Fully tighten the rear suspension arm assembly No.2 with the bolt and nut.
Torque: 112 Nm (1,140 kgf-cm, 83 ft. lbs.)
HINT: While holding the nut, turn the bolt.
14. FULLY TIGHTEN REAR SUSPENSION ARM ASSEMBLY NO.1
a. Fully tighten the rear suspension arm assembly No.1 with the bolt and nut.
Torque: 112 Nm (1,140 kgf-cm, 83 ft. lbs.)
HINT: While holding the nut, turn the bolt.
15. FULLY TIGHTEN REAR STRUT ROD ASSEMBLY
a. Fully tighten the rear strut rod assembly (rear axle carrier side) with the bolt and nut.
Torque: 80 Nm (816 kgf-cm, 59 ft. lbs.)
HINT: While holding the nut, turn the bolt.
b. Fully tighten the rear strut rod assembly (vehicle side) with the bolt and nut.
Torque: 80 Nm (816 kgf-cm, 59 ft. lbs.)
HINT: While holding the nut, turn the bolt.