RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
a. Separate the 2 oil cooler hoses from the oil cooler tubes.
b. Remove the bolt and oil cooler tube.
c. Using SST and a wrench, separate the oil cooler tube.
SST 09023-12701
5. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY
a. Remove the nut from the control shaft lever.
b. Using a screwdriver, disengage the 2 claws, disconnect the control cable with clip from the control cable bracket.
HINT: Tape up the screwdriver tip before use.
c. Remove the clip.
6. REMOVE PARK/NEUTRAL POSITION SWITCH